We are going to be learning how to sew an unlined patch pocket or “applied pocket” as they are professionally known. This is the third tutorial in our pockets series.
As I have mentioned before, pockets are classified into three categories: inseam, slashed, and applied pockets and of course, there are variations and combinations of them all so it can be confusing. This series of tutorials is designed to help.
We have seen an example of a slashed pocket in the two previous tutorials. The links are below.
A patch pocket, as the name implies, is a separate piece of fabric that is applied to the right side of the fabric. Done properly it will give your garment a look of professionalism and of course practicality. The patch pocket is also an excellent way to separate your design from the rest. Have a look at the picture below for just a few examples of patch pockets variations.
Where to use a patch pocket
The first or most common use, of course, would have to be on a man’s shirt. From the geeky-looking dude to almost every office worker in the country, a man’s shirt feels incomplete without a pocket on the shirt. And, yet the patch pocket is only noticed when it is missing or when it is badly made.
The unlined patch pocket is also found on man’s pajamas and aprons. (Although I can understand the apron, I really do not get why men’s pajamas have pockets..)Our preferred place for unlined patch pockets is, of course, the back of denim jeans.
In this tutorial, I will be showing you the most basic of the applied pockets. The following tutorial is for cotton fabric, linen, canvas, and denim or a combination of them. This type of pocket is not for loosely woven fabrics because the pocket will gape at the opening.
Download the free template
Download the free patch pocket template from over on our sister site at sewing4free.com. While you’re there, don’t forget to sign up for the email list!
Print the pocket pattern using Adobe Reader in a Landscape setting.
How to make an unlined patch pocket tutorial with a template
The seam allowance for this template is 1/2″. This seam allowance can change depending on the pattern, but the following instructions are the same for any shape patched pocket.
Trace the template on a piece of cardboard or thick paper.
Cut the pocket using the pattern.
Fold the top 1/4″ to the wrong side of the fabric and iron.
Fold the top 3/8″ back to the right side of the fabric.
Sew the sides of the pocket at 1/2″. Stop after the fold. In this case and when using this pattern, I only have to stitch about 3/8″.Fold the top back around and iron.
Working on the wrong side of the pocket, place the cardboard pattern inside the folded top. And using an iron fold the edges using the cardboard. Remove the cardboard and iron the front of the pocket.
We will make a double stitch on the top. Sew the top of the pocket at 3/8″ from the edge. Then again at 1/8.
There are two things you can decide to do now. If you have a twin needle, you can sew the patch pocket straight to the garment you are making. Or, sew around the pocket at 3/8″ and then sew the pocket to the garment.
As you can see, making an unlined patch pocket can be both simple and complicated. Feel free to experiment with the design of the template for your different creations.
I hope you have found this short tutorial useful. As always, I really welcome your questions and comments in the comment section below. Until next time, Happy Sewing!
If You’d Like To Support Our Site
If you want to help us continue to bring you a wide selection of free sewing patterns and projects, please consider buying us a coffee. We’d really, really appreciate it.