table mat

I have been invited to a 4th of July charity barbecue but unfortunately, I can’t attend because I will be fabric hunting…..More on that later.  The barbecue is organized by a friend of mine who operates a foundation, and this year the funds are being raised to help children of broken families with good grades to finish high school.  I was asked to bring an item for the auction, specifically a table mat, not too big not too small.  The invitation sat on my Facebook messages for 2 weeks and I  just read it 24 hours ago.  I panicked!  Even if I can’t go, I know my friend will expect the table mat.  After all, it is a good cause.

Looking in my sewing room, I  spotted a roll of nylon cord next in my leftover fabric basket.  There’s not much fabric left in the basket, but there’s a lot of cord.  I thought a little bit about what I could do with what I had and I came up with an idea.  I have two different colors of American star-themed fabric, so I can alternate the fabric to make a pleasing, contrasting effect.

The BBQ’s theme is “Americana” and I thought this was the perfect opportunity to launch a once-in-a-month item.  So for this project, I will be showing you how to make a corded table mat which I’ll call the Star Spangled Table Mat.  The cord that we’ll use is encased in a bias tape so that there will be no raw edges.

table mat

In the future, I would greatly appreciate it if you guys could send me some project ideas for this Americana theme.  As well as ideas for future themed series.

For this table mat, I am using a leftover fabric from a past project. I bought it at and the name of the fabric is Spots and Stripes.  If you don’t have a Spotlight near you, these fabrics from Amazon are very similar and would work nicely:

Fabric Recommendations


table mat

How to make the corded table mat

I can see you asking why 26 yards? Is the smoke of the barbecue already getting to her?  No, not really. I have a lot of cord.  Left over from the Fringed Mat, I had fun with that project and because I did not know how much cord I would use at the time, I bought a lot!  Then I bought even more for making the Hoodie.  So you see, I have a lot to go through.

Step One

Cut 26 yards of cord from the roll and fold in half.

Change your machine to a Jeans needle and using a large zigzag, start zigzagging the cord to create a tape with it.  Once you get to the end cut 2″ off on one side and only.  This is so we can make the rope narrower at the end when it is time to finish the table mat.

Step Two

Now let’s work on the bias tape.  We are talking about 13 yards of bias tape.  A continuous bias tutorial is already written so once you learn this trick, threading the tape will be the longest part of the making this super easy table mat.  As I mentioned, I used contrasting colors so when using the technique in the tutorial, I used one triangle of red and one triangle of blue which made a tape of alternating colors.

table mat

Cut strips of bias 1 1/2″ wide.  Sew at 1/2″ seam allowance right sides together.  If you are using a thicker cord, remember to leave 1/8″ for ease so the cord can pass through the bias casing easily.

table mat

To turn the bias tape use a large safety pin.  Grab a good movie and start turning, this will take an hour.

Step Three

table mat

Use the same safety pin to feed the cord into the casing.  Inserting a pen before the pin will make feeding the cord easier and faster. Once you have threaded the cord inside the casing, it’s time to start to sew the mat.  Use a needle and thread to close the casing on the pin side.

Step Four

Fold in the beginning of the cord making a small circle and using your zigzag sew in between the cords.  Start sewing counter-clockwise, not like me, I found after the mat reached 10″, I had to flip it over and sew in the other direction.

 Sew slowly so you do not miss any spots. With one yard sewn so far, this is the size of the corded table mat.  The following pictures will show you the mat in different size and the amount used so you can choose how much fabric and cord you need to make a set of plate mats. The size of the table mat is big enough for a coaster at two yards.  It looks like a mug rug at three yards. At four yards.At five yards. This is perfect for a plate using six yards.

At seven yards it’s still good for a plate if you wanted to show the mat around the edges.  Here is where I had to flip my mat upside down because I ran out of space on the right side of the machine.  The good news is no one will be able to tell I am sewing on the other side of the mat. I think at this point is big enough for a plate, but I am going further and make a centerpiece.  Using a total of 14 yards of bias tape I made a 16″ mat and I love it.  I will make a few coasters to go with it and maybe a bowl which I’ll show you next week.

table mat

Step Five

At the end of the mat, make sure you end with the same color of fabric and not like mine. I am well aware I have to refine this ending, but perhaps you guys can suggest a better way of doing it. I simply sewed the end shut and zigzag the two sides together as close as I could.

table mat

Now I’m off to make a few coasters to go along with this project. Thanks for reading! Just in case you didn’t see it before, we recently finished the Easy Pleated Skirt sew-along, check it out if you’re interested!

Next week, I’ll show you how to use this same technique to make a bowl like this:

table mat

If You’d Like To Support Our Site

If you want to help us continue to bring you a wide selection of free sewing patterns and projects, please consider buying us a coffee.  We’d really, really appreciate it.

Source link